This course covers oil burner components. Proper installation of oil burners will be reviewed. Students learn how to properly do vacuum testing and learn the correct method of measuring oil and pump pressures and how to check for defects. Students learn how to clean or replace a defective nozzle and how to check for water or sediment. Also, proper operation and maintenance of oil burner motors and annual tune up procedures are covered. 1/30/2012-2/3/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=366
User:
ICPA Public Calendar
Time:
10:00am - 11:00am
Description:
EAG & CAH - Meeting w/J. Stratton at DEEP
User:
ICPA Public Calendar
Time:
2:00pm - 4:00pm
Description:
Large ICPA Conf. Room
User:
ICPA Public Calendar
Time:
4:00pm - 5:00pm
Description:
CAH - Conf. Call w/API re. Stage II
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course provides the student with an understanding of the application of domestic refrigeration systems. The student will learn about evaporators, condensers, compressors, expansion devices, and controls. 1/9/2012-2/15/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=85
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course covers oil burner components. Proper installation of oil burners will be reviewed. Students learn how to properly do vacuum testing and learn the correct method of measuring oil and pump pressures and how to check for defects. Students learn how to clean or replace a defective nozzle and how to check for water or sediment. Also, proper operation and maintenance of oil burner motors and annual tune up procedures are covered. 1/30/2012-2/3/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=366
User:
ICPA Public Calendar
Time:
9:00am - 10:00am
Description:
Plumbing & Piping Board Meeting Rm 117
User:
ICPA Public Calendar
Time:
9:30am - 10:30am
Description:
DC conf call Weblink
User:
ICPA Public Calendar
Time:
10:00am - 4:00pm
Description:
Stage II workgroup meetings will be held at 79 Elm Street, Harford, CT in the Holcombe Room, which is located on the 5th Floor.
he "Stage II Decommissioning Options Meeting" will be held at 10:00 AM and the "Stage I Enhancement Options Meeting" will be held at 1:00 PM.
Robert W. Girard
Assistant Director, Air Enforcement
CT Department of Energy and Environmental Protection
79 Elm Street
Hartford, CT 06106
860-424-3461
User:
ICPA Public Calendar
Time:
12:00pm - 1:00pm
Description:
lunch
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course covers chemical makeup, BTU content, and specific gravity of different types of gas. Students learn about gas pressure and sizing of gas lines. Gas burners, proper air mixture, ignition systems, and operation of gas valves are discussed. 1/10/2012-2/16/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=77
User:
ICPA Public Calendar
Description:
CAH - Ethics Report Due
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course covers oil burner components. Proper installation of oil burners will be reviewed. Students learn how to properly do vacuum testing and learn the correct method of measuring oil and pump pressures and how to check for defects. Students learn how to clean or replace a defective nozzle and how to check for water or sediment. Also, proper operation and maintenance of oil burner motors and annual tune up procedures are covered. 1/30/2012-2/3/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=366
User:
ICPA Public Calendar
Time:
10:00am - 2:00pm
Description:
Small Conf. Room
User:
ICPA Public Calendar
Time:
2:30pm - 3:30pm
Description:
Metromedia Energy
User:
ICPA Public Calendar
Time:
3:00pm - 4:00pm
Description:
Rocky Hill
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course provides the student with an understanding of the application of commercial refrigeration systems. It will teach the student about evaporators, condensers, compressors, expansion devices, and controls. 2/6/2012-2/10/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=372
User:
ICPA Public Calendar
Time:
9:00am - 11:00am
Description:
EAG & CAH - Meeting w/Jim. Thurston in Waterbury
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course provides the student with an understanding of the application of domestic refrigeration systems. The student will learn about evaporators, condensers, compressors, expansion devices, and controls. 1/9/2012-2/15/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=85
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course provides the student with an understanding of the application of commercial refrigeration systems. It will teach the student about evaporators, condensers, compressors, expansion devices, and controls. 2/6/2012-2/10/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=372
User:
ICPA Public Calendar
Time:
10:00am - 1:00pm
Description:
Hampton Inn 510 Saw Mill Rd.(Rte. 95, Exit
42) West Haven
User:
ICPA Public Calendar
Time:
2:00pm - 3:00pm
Description:
(800) 525-9066, Code 307679
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course covers chemical makeup, BTU content, and specific gravity of different types of gas. Students learn about gas pressure and sizing of gas lines. Gas burners, proper air mixture, ignition systems, and operation of gas valves are discussed. 1/10/2012-2/16/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=77
User:
ICPA Public Calendar
Time:
All day event
Description:
First Day of Legislative Session
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course provides the student with an understanding of the application of commercial refrigeration systems. It will teach the student about evaporators, condensers, compressors, expansion devices, and controls. 2/6/2012-2/10/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=372
User:
ICPA Public Calendar
Time:
2:00pm - 3:00pm
Description:
CAH - Conf. Call w/Stage II Workgroup
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course provides the student with an understanding of the application of domestic refrigeration systems. The student will learn about evaporators, condensers, compressors, expansion devices, and controls. 1/9/2012-2/15/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=85
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course provides the student with an understanding of the application of commercial refrigeration systems. It will teach the student about evaporators, condensers, compressors, expansion devices, and controls. 2/6/2012-2/10/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=372
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course covers chemical makeup, BTU content, and specific gravity of different types of gas. Students learn about gas pressure and sizing of gas lines. Gas burners, proper air mixture, ignition systems, and operation of gas valves are discussed. 1/10/2012-2/16/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=77
User:
ICPA Public Calendar
Time:
8:00am - 2:00pm
Description:
Fred Drake Front Conference Room all morning.
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course provides the student with an understanding of the application of commercial refrigeration systems. It will teach the student about evaporators, condensers, compressors, expansion devices, and controls. 2/6/2012-2/10/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=372
User:
ICPA Public Calendar
Time:
10:00am - 3:00pm
Description:
ICPA Small Conf. Room
User:
ICPA Public Calendar
Time:
11:00am - 12:00pm
Description:
55 Elm St.
User:
ICPA Public Calendar
Time:
2:00pm - 6:00pm
Description:
Amarante's New Haven
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course covers the various industry codebooks: NFPA 31, NFPA 54, NFPA 58, and the International Mechanical Code. Students learn how to properly and safely handle different materials, equipment, and tools. 2/13/2012-2/17/2012
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course provides the student with an understanding of the application of domestic refrigeration systems. The student will learn about evaporators, condensers, compressors, expansion devices, and controls. 1/9/2012-2/15/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=85
User:
ICPA Public Calendar
Time:
8:00am - 4:00pm
Description:
Looking to acquire your Solar Thermal License? ITEC can help. Our course is approved by the Department of Consumer Protection and covers everything you need to get you on your way to acquiring your solar thermal license. This 24 hour course is designed for those individuals who already hold Connecticut P or S Licenses. Our course will include all aspects of solar thermal work—installation, erection, repair, replacement, alteration or maintenance of active, passive and hybrid solar systems that directly convert ambient energy into heat or convey, store & distribute such ambient energy. ITEC’s Solar Thermal Certification Course covers solar theory, solar energy fundamentals, energy wave forms, heat transfer, insulation values and how they are effected by location, season and climate. The theory of how to correctly measure and size a solar system and make a site assessment will be covered. How to check for defects in materials and components will be covered. System piping, pool heaters, water relief, and other uses for Solar heated water will be discussed. Correct procedures, tools and equipment use will be emphasized. National codes relating to Solar heating systems and piping will be reviewed. These topics and more will be included in ITEC’s solar certification course. Course Objectives: Correctly answer questions relating to piping of solar systems. Properly identify tools, equipment and materials related to solar units. Appropriately answer questions relating to tanks, flow rates and wiring Accurately identify parts of a solar system. Determine everything is structurally and visually sound or if there are defects on any part of the entire installation. Worksite safety Join us for this 3 day course designed for those individuals whom already have prior S and P licensing and receive certification toward your Solar Thermal license.Register:http://www.icpa.org/store/products_view.php?url_product_id=544
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course covers the various industry codebooks: NFPA 31, NFPA 54, NFPA 58, and the International Mechanical Code. Students learn how to properly and safely handle different materials, equipment, and tools. 2/13/2012-2/17/2012
User:
ICPA Public Calendar
Time:
12:00pm - 2:00pm
Description:
SAB Meeting @Wesson Energy
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course covers chemical makeup, BTU content, and specific gravity of different types of gas. Students learn about gas pressure and sizing of gas lines. Gas burners, proper air mixture, ignition systems, and operation of gas valves are discussed. 1/10/2012-2/16/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=77
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course covers the various industry codebooks: NFPA 31, NFPA 54, NFPA 58, and the International Mechanical Code. Students learn how to properly and safely handle different materials, equipment, and tools. 2/13/2012-2/17/2012
User:
ICPA Public Calendar
Time:
8:00am - 4:00pm
Description:
Looking to acquire your Solar Thermal License? ITEC can help. Our course is approved by the Department of Consumer Protection and covers everything you need to get you on your way to acquiring your solar thermal license. This 24 hour course is designed for those individuals who already hold Connecticut P or S Licenses. Our course will include all aspects of solar thermal work—installation, erection, repair, replacement, alteration or maintenance of active, passive and hybrid solar systems that directly convert ambient energy into heat or convey, store & distribute such ambient energy. ITEC’s Solar Thermal Certification Course covers solar theory, solar energy fundamentals, energy wave forms, heat transfer, insulation values and how they are effected by location, season and climate. The theory of how to correctly measure and size a solar system and make a site assessment will be covered. How to check for defects in materials and components will be covered. System piping, pool heaters, water relief, and other uses for Solar heated water will be discussed. Correct procedures, tools and equipment use will be emphasized. National codes relating to Solar heating systems and piping will be reviewed. These topics and more will be included in ITEC’s solar certification course. Course Objectives: Correctly answer questions relating to piping of solar systems. Properly identify tools, equipment and materials related to solar units. Appropriately answer questions relating to tanks, flow rates and wiring Accurately identify parts of a solar system. Determine everything is structurally and visually sound or if there are defects on any part of the entire installation. Worksite safety Join us for this 3 day course designed for those individuals whom already have prior S and P licensing and receive certification toward your Solar Thermal license.Register:http://www.icpa.org/store/products_view.php?url_product_id=544
This course provides the student with an understanding of the application of domestic refrigeration systems. The student will learn about evaporators, condensers, compressors, expansion devices, and controls. 1/9/2012-2/15/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=85
User:
ICPA Public Calendar
Time:
7:30am - 9:30am
Description:
Leadership
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course covers the various industry codebooks: NFPA 31, NFPA 54, NFPA 58, and the International Mechanical Code. Students learn how to properly and safely handle different materials, equipment, and tools. 2/13/2012-2/17/2012
User:
ICPA Public Calendar
Time:
8:00am - 4:00pm
Description:
Looking to acquire your Solar Thermal License? ITEC can help. Our course is approved by the Department of Consumer Protection and covers everything you need to get you on your way to acquiring your solar thermal license. This 24 hour course is designed for those individuals who already hold Connecticut P or S Licenses. Our course will include all aspects of solar thermal work—installation, erection, repair, replacement, alteration or maintenance of active, passive and hybrid solar systems that directly convert ambient energy into heat or convey, store & distribute such ambient energy. ITEC’s Solar Thermal Certification Course covers solar theory, solar energy fundamentals, energy wave forms, heat transfer, insulation values and how they are effected by location, season and climate. The theory of how to correctly measure and size a solar system and make a site assessment will be covered. How to check for defects in materials and components will be covered. System piping, pool heaters, water relief, and other uses for Solar heated water will be discussed. Correct procedures, tools and equipment use will be emphasized. National codes relating to Solar heating systems and piping will be reviewed. These topics and more will be included in ITEC’s solar certification course. Course Objectives: Correctly answer questions relating to piping of solar systems. Properly identify tools, equipment and materials related to solar units. Appropriately answer questions relating to tanks, flow rates and wiring Accurately identify parts of a solar system. Determine everything is structurally and visually sound or if there are defects on any part of the entire installation. Worksite safety Join us for this 3 day course designed for those individuals whom already have prior S and P licensing and receive certification toward your Solar Thermal license.Register:http://www.icpa.org/store/products_view.php?url_product_id=544
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course covers chemical makeup, BTU content, and specific gravity of different types of gas. Students learn about gas pressure and sizing of gas lines. Gas burners, proper air mixture, ignition systems, and operation of gas valves are discussed. 1/10/2012-2/16/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=77
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course covers the various industry codebooks: NFPA 31, NFPA 54, NFPA 58, and the International Mechanical Code. Students learn how to properly and safely handle different materials, equipment, and tools. 2/13/2012-2/17/2012
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course provides the student with the understanding of indoor air quality, comfort and psychometrics. The student will learn how the refrigeration system is applied to air conditioning & the student will be given instructions on the proper installation and operation of these systems. 2-20-2012 to 2/24/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=95
User:
ICPA Public Calendar
Time:
8:00am - 4:00pm
Description:
BPI’s Building Analyst 1 Training will give your technicians the knowledge they need to perform a whole house energy audit. Learn the relationship between all the systems in the house and the effects on health, safety, comfort and efficiency. The whole house is a system, learn how it all works together and how flaws in one part can compromise performance throughout. Learn building science fundamentals, energy conservation strategies, heat loss calculations, duct testing and sealing, blower door testing, etc. Find the root cause of a problem and give them solutions that work! Your technicians already know the HVAC system now they can learn about the whole house as a system. 5 days of intensive, comprehensive training in class and field training and testing Registrations are not complete until ITEC receives payment in full. The registrant understands that after the registration deadline for each class there will be NO refunds, as after the registration deadline ITEC is obligated to the contractor for the services. The registrant may cancel a paid registration and receive a full refund if the cancellation is made on or before the registration deadline. ITEC reserves the right to cancel any class at the registration deadline if there are not sufficient numbers of registrants to run the class. Paid Registration deadline is February 13, 2012. Class runs from February 20-24, 2012. Test Dates are February 27-29, 2012. Classes are held at 145 Railroad Hill, Waterbury, CT.
Register:http://www.icpa.org/store/products_view.php?url_product_id=451
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course provides the student with an understanding of the application of commercial refrigeration systems. It will teach the student about evaporators, condensers, compressors, expansion devices, and controls. 2/20/2012-3/28/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=86
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course provides the student with the understanding of indoor air quality, comfort and psychometrics. The student will learn how the refrigeration system is applied to air conditioning & the student will be given instructions on the proper installation and operation of these systems. 2-20-2012 to 2/24/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=95
User:
ICPA Public Calendar
Time:
8:00am - 4:00pm
Description:
BPI’s Building Analyst 1 Training will give your technicians the knowledge they need to perform a whole house energy audit. Learn the relationship between all the systems in the house and the effects on health, safety, comfort and efficiency. The whole house is a system, learn how it all works together and how flaws in one part can compromise performance throughout. Learn building science fundamentals, energy conservation strategies, heat loss calculations, duct testing and sealing, blower door testing, etc. Find the root cause of a problem and give them solutions that work! Your technicians already know the HVAC system now they can learn about the whole house as a system. 5 days of intensive, comprehensive training in class and field training and testing Registrations are not complete until ITEC receives payment in full. The registrant understands that after the registration deadline for each class there will be NO refunds, as after the registration deadline ITEC is obligated to the contractor for the services. The registrant may cancel a paid registration and receive a full refund if the cancellation is made on or before the registration deadline. ITEC reserves the right to cancel any class at the registration deadline if there are not sufficient numbers of registrants to run the class. Paid Registration deadline is February 13, 2012. Class runs from February 20-24, 2012. Test Dates are February 27-29, 2012. Classes are held at 145 Railroad Hill, Waterbury, CT.
Register:http://www.icpa.org/store/products_view.php?url_product_id=451
This course covers the chemical makeup of oil and its relative viscosity and pour point. Students learn proper sizing and piping of oil lines including one and two pipe systems. Students learn how to correctly install, fill, and vent pipes. They learn how to correctly locate inside fuel tanks and outside buried tanks. Demonstrations show how fuel is prepared for burning through pressure and atomization of primary and secondary air. Students learn how to properly size nozzles and how to determine their proper application. 2/21/2012-3/29/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=78
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course provides the student with the understanding of indoor air quality, comfort and psychometrics. The student will learn how the refrigeration system is applied to air conditioning & the student will be given instructions on the proper installation and operation of these systems. 2-20-2012 to 2/24/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=95
User:
ICPA Public Calendar
Time:
8:00am - 4:00pm
Description:
BPI’s Building Analyst 1 Training will give your technicians the knowledge they need to perform a whole house energy audit. Learn the relationship between all the systems in the house and the effects on health, safety, comfort and efficiency. The whole house is a system, learn how it all works together and how flaws in one part can compromise performance throughout. Learn building science fundamentals, energy conservation strategies, heat loss calculations, duct testing and sealing, blower door testing, etc. Find the root cause of a problem and give them solutions that work! Your technicians already know the HVAC system now they can learn about the whole house as a system. 5 days of intensive, comprehensive training in class and field training and testing Registrations are not complete until ITEC receives payment in full. The registrant understands that after the registration deadline for each class there will be NO refunds, as after the registration deadline ITEC is obligated to the contractor for the services. The registrant may cancel a paid registration and receive a full refund if the cancellation is made on or before the registration deadline. ITEC reserves the right to cancel any class at the registration deadline if there are not sufficient numbers of registrants to run the class. Paid Registration deadline is February 13, 2012. Class runs from February 20-24, 2012. Test Dates are February 27-29, 2012. Classes are held at 145 Railroad Hill, Waterbury, CT.
Register:http://www.icpa.org/store/products_view.php?url_product_id=451
User:
ICPA Public Calendar
Time:
10:00am - 11:00am
Description:
Collin Morgan & his mother Paula Morgan. Cell 860-250-7877.
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course provides the student with an understanding of the application of commercial refrigeration systems. It will teach the student about evaporators, condensers, compressors, expansion devices, and controls. 2/20/2012-3/28/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=86
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course provides the student with the understanding of indoor air quality, comfort and psychometrics. The student will learn how the refrigeration system is applied to air conditioning & the student will be given instructions on the proper installation and operation of these systems. 2-20-2012 to 2/24/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=95
User:
ICPA Public Calendar
Time:
8:00am - 4:00pm
Description:
BPI’s Building Analyst 1 Training will give your technicians the knowledge they need to perform a whole house energy audit. Learn the relationship between all the systems in the house and the effects on health, safety, comfort and efficiency. The whole house is a system, learn how it all works together and how flaws in one part can compromise performance throughout. Learn building science fundamentals, energy conservation strategies, heat loss calculations, duct testing and sealing, blower door testing, etc. Find the root cause of a problem and give them solutions that work! Your technicians already know the HVAC system now they can learn about the whole house as a system. 5 days of intensive, comprehensive training in class and field training and testing Registrations are not complete until ITEC receives payment in full. The registrant understands that after the registration deadline for each class there will be NO refunds, as after the registration deadline ITEC is obligated to the contractor for the services. The registrant may cancel a paid registration and receive a full refund if the cancellation is made on or before the registration deadline. ITEC reserves the right to cancel any class at the registration deadline if there are not sufficient numbers of registrants to run the class. Paid Registration deadline is February 13, 2012. Class runs from February 20-24, 2012. Test Dates are February 27-29, 2012. Classes are held at 145 Railroad Hill, Waterbury, CT.
Register:http://www.icpa.org/store/products_view.php?url_product_id=451
User:
ICPA Public Calendar
Time:
3:00pm - 4:00pm
Description:
EAG w AEC
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course covers the chemical makeup of oil and its relative viscosity and pour point. Students learn proper sizing and piping of oil lines including one and two pipe systems. Students learn how to correctly install, fill, and vent pipes. They learn how to correctly locate inside fuel tanks and outside buried tanks. Demonstrations show how fuel is prepared for burning through pressure and atomization of primary and secondary air. Students learn how to properly size nozzles and how to determine their proper application. 2/21/2012-3/29/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=78
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
This course provides the student with the understanding of indoor air quality, comfort and psychometrics. The student will learn how the refrigeration system is applied to air conditioning & the student will be given instructions on the proper installation and operation of these systems. 2-20-2012 to 2/24/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=95
User:
ICPA Public Calendar
Time:
8:00am - 4:00pm
Description:
BPI’s Building Analyst 1 Training will give your technicians the knowledge they need to perform a whole house energy audit. Learn the relationship between all the systems in the house and the effects on health, safety, comfort and efficiency. The whole house is a system, learn how it all works together and how flaws in one part can compromise performance throughout. Learn building science fundamentals, energy conservation strategies, heat loss calculations, duct testing and sealing, blower door testing, etc. Find the root cause of a problem and give them solutions that work! Your technicians already know the HVAC system now they can learn about the whole house as a system. 5 days of intensive, comprehensive training in class and field training and testing Registrations are not complete until ITEC receives payment in full. The registrant understands that after the registration deadline for each class there will be NO refunds, as after the registration deadline ITEC is obligated to the contractor for the services. The registrant may cancel a paid registration and receive a full refund if the cancellation is made on or before the registration deadline. ITEC reserves the right to cancel any class at the registration deadline if there are not sufficient numbers of registrants to run the class. Paid Registration deadline is February 13, 2012. Class runs from February 20-24, 2012. Test Dates are February 27-29, 2012. Classes are held at 145 Railroad Hill, Waterbury, CT.
Register:http://www.icpa.org/store/products_view.php?url_product_id=451
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
Students learn how to quickly solve many practical problems from simple math to measuring area and volume as it applies to the trade. The blueprint course covers symbols of the trade. Students learn scale and demonstrate how to make floor plans, determine elevation, and set up framework. 2/27/2012-3/2/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=440
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course provides the student with an understanding of the application of commercial refrigeration systems. It will teach the student about evaporators, condensers, compressors, expansion devices, and controls. 2/20/2012-3/28/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=86
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
Students learn how to quickly solve many practical problems from simple math to measuring area and volume as it applies to the trade. The blueprint course covers symbols of the trade. Students learn scale and demonstrate how to make floor plans, determine elevation, and set up framework. 2/27/2012-3/2/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=440
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course covers the chemical makeup of oil and its relative viscosity and pour point. Students learn proper sizing and piping of oil lines including one and two pipe systems. Students learn how to correctly install, fill, and vent pipes. They learn how to correctly locate inside fuel tanks and outside buried tanks. Demonstrations show how fuel is prepared for burning through pressure and atomization of primary and secondary air. Students learn how to properly size nozzles and how to determine their proper application. 2/21/2012-3/29/2012
Register:http://www.icpa.org/store/products_view.php?url_product_id=78
User:
ICPA Public Calendar
Time:
8:00am - 3:30pm
Description:
Students learn how to quickly solve many practical problems from simple math to measuring area and volume as it applies to the trade. The blueprint course covers symbols of the trade. Students learn scale and demonstrate how to make floor plans, determine elevation, and set up framework. 2/27/2012-3/2/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=440
User:
ICPA Public Calendar
Time:
5:30pm - 8:30pm
Description:
This course provides the student with an understanding of the application of commercial refrigeration systems. It will teach the student about evaporators, condensers, compressors, expansion devices, and controls. 2/20/2012-3/28/2012
Register: http://www.icpa.org/store/products_view.php?url_product_id=86
